Price: [price_with_discount]
(as of [price_update_date] – Details)
[ad_1]
Product Description
Description:
This OLED display module is small, only 0.96″ diagonal, it is made of 128×64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip.
It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness.
That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode. Communication: I2C/IIC Interface, only need two I/O ports.
It compatibles with R3 board and Mega, Raspberry Pi, 51 Series MCU, STM32 etc.
No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts.
There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
Features:
Fully compatible with for Arduino, 51 series, MSP430 Series, STM32/2, CSR IC, etc.
Ultra-low power comsumption: full screen lit 0.08W
Super high brightness and contrast are adjustable
With embedded driver/controller
Interface type is IIC (I2C)
Pin Definitions: GND, VCC, SCL, SDA
Pins: 4 pins
Voltage: 3.3V DC
Working Temperature: -30°~ 70°
Drive Duty: 1/64 Duty
High resoluton: 128*64 pixels(approx)
Display : Yello/Blue
Technology support:
wiki.52pi.com/index.php?title=S-0018
Package includes:
2 x 0.96 inch OLED Display kits (Yellow Blue Two-Color)
8 x Male to Female Dupont Wire
8 x Female to Female Dupont Wire
High resoluton: 128*64 pixels(approx)
Support I2c IIC communication Protocol,the IIC address can be changed,it is convenient to use with different machines .
Pin Definitions: GND, VCC, SCL, SDA;Pins: 4 pins
Package includes:2 x 0.96 inch OLED Display kits (Yellow Blue Two-Color), 8x Male to Femal Dupont Wire, 8x Female to Female Dupont Wire
[ad_2]